Hi Im new to the forum and have recently purchased an 88 prelude
The odometer is working but the speedo is not. It was working when i purchased the car but it has just stopped operating
Does anyone have any ideas on how to fix this
Thanks
88 Prelude Speedo not working
Moderators: RedRacer, spiffyguido
-
- Prelude Enthusiast
- Posts: 2
- Joined: Thu Jun 05, 2014 7:34 pm
- spiffyguido
- Moderator
- Posts: 2196
- Joined: Fri Nov 11, 2005 2:55 am
- Prelude Model: 1991 SE-SR
- Location: Alberta, Canada
- Contact:
Re: 88 Prelude Speedo not working
Check the speedo cable. I believe on the 88 Preludes a speedometer cable is still used. It will run from the firewall down into the top side of the transmission and may be retained by a small metal clip. These can fall off sometimes.
If instead of a cable you have a VSS sending unit (small metal box on top of transmission), check the wiring.
If instead of a cable you have a VSS sending unit (small metal box on top of transmission), check the wiring.
-
- Prelude Enthusiast
- Posts: 2
- Joined: Thu Jun 05, 2014 7:34 pm
Re: 88 Prelude Speedo not working
The speedo cable is connected fine as it is still driving the odometer
There is an electronic connection between that and the Speedo that i am not sure is functioning correctly
I have taken another dash out of a car at a wreckers and had it checked to be sure its Ok before i install
Thanks for the answer anyway
There is an electronic connection between that and the Speedo that i am not sure is functioning correctly
I have taken another dash out of a car at a wreckers and had it checked to be sure its Ok before i install
Thanks for the answer anyway