cylinder head pjo
Moderators: RedRacer, spiffyguido
-
wingwong
- Prelude Enthusiast
- Posts: 8
- Joined: Sun Oct 23, 2011 1:29 pm
cylinder head pjo
I have a 1987 honda prelude 2.0 si cylinder head pjo (hf-4) will a 1988 2.o honda accord pjo (hf-15) work? Pjo is the cast of the cylinder what is hf-4 or hf-15 stand for? Thanks
-
spiffyguido
- Moderator
- Posts: 2196
- Joined: Fri Nov 11, 2005 2:55 am
- Prelude Model: 1991 SE-SR
- Location: Alberta, Canada
- Contact:
Re: cylinder head pjo
I'm not sure what the HF-4 and HF-15 stands for.
The PJ0 was the head that went on the A20A3 engine though, and that engine was used in 2nd gen Preludes and in Accords from 1986 until 1989. Thus, if you're trying to do a head swap, it should work just fine. At one point, I did swap an Accord A20A3 into a 2nd gen Prelude and the engines were identical, so you shouldn't have any trouble with the head.
The PJ0 was the head that went on the A20A3 engine though, and that engine was used in 2nd gen Preludes and in Accords from 1986 until 1989. Thus, if you're trying to do a head swap, it should work just fine. At one point, I did swap an Accord A20A3 into a 2nd gen Prelude and the engines were identical, so you shouldn't have any trouble with the head.
-
wingwong
- Prelude Enthusiast
- Posts: 8
- Joined: Sun Oct 23, 2011 1:29 pm