Hello have a 1994 honda Lude
Needed to replace the water pump and on completion of that have some how screws up timing
Help me
Thanks erin
Does any one know what the timing should be???
Moderators: RedRacer, spiffyguido
-
emt000
- Prelude Enthusiast
- Posts: 2
- Joined: Thu Nov 07, 2013 1:32 am
-
spiffyguido
- Moderator
- Posts: 2196
- Joined: Fri Nov 11, 2005 2:55 am
- Prelude Model: 1991 SE-SR
- Location: Alberta, Canada
- Contact:
Re: Does any one know what the timing should be???
You mean in terms of degrees before top dead center? Or you need help setting the timing?
You may want to have a look at our video series (for 3rd gens, but still relevant) that details timing belt replacement. It talks about setting the timing. The process for the 4th gens is very similar and is fully described in the service manual.
videos.php
You may want to have a look at our video series (for 3rd gens, but still relevant) that details timing belt replacement. It talks about setting the timing. The process for the 4th gens is very similar and is fully described in the service manual.
videos.php
-
emt000
- Prelude Enthusiast
- Posts: 2
- Joined: Thu Nov 07, 2013 1:32 am
Re: Does any one know what the timing should be???
Yea setting it
We don't have a Manuel very new to all this kinda thing
We don't have a Manuel very new to all this kinda thing
-
spiffyguido
- Moderator
- Posts: 2196
- Joined: Fri Nov 11, 2005 2:55 am
- Prelude Model: 1991 SE-SR
- Location: Alberta, Canada
- Contact:
Re: Does any one know what the timing should be???
You're welcome to download the service manual from our manuals section. See the link at the top of the screen.
Take a look at the procedure, then let us know what questions you have and we'll help you through it.
Take a look at the procedure, then let us know what questions you have and we'll help you through it.