Hi guys, I am thinking of getting an OBX manifold and downpipe for my lude like the one in this link:
OBX Exhaust Header 92-96 Honda Prelude VTEC 2.2L NEW!!! on eBay (end time 08-Aug-09 18:33:27 BST)
Can anyone tell me whether or not this will fit a JDM BB1? Are there any differences between USDM VTECs and JDM VTECs?
Unfortunately, I have no idea about USDM ludes cos I live in the UK, and here, a UK cat is about 5 inches longer than a JDM cat and the flange on the downpipes are different. Are there differences like this with a USDM?
Cheers,
Darren
PS - here is a recent pic of my lude
USDM vs JDM manifolds/exhausts
Moderators: RedRacer, spiffyguido
-
- Prelude Enthusiast
- Posts: 4
- Joined: Thu Jul 09, 2009 1:08 pm
- spiffyguido
- Moderator
- Posts: 2196
- Joined: Fri Nov 11, 2005 2:55 am
- Prelude Model: 1991 SE-SR
- Location: Alberta, Canada
- Contact:
Re: USDM vs JDM manifolds/exhausts
Hi Darren,
That's a tough question. The flanges on the block are most likely the same, so I think you only need to be concerned about the cat end of the header. I don't know about whether there is a difference between JDM cat lengths and USDM cat lengths.
There's a user here called RedRacer that knows a lot about 4th gen cars. He might be able to help you.
That's a tough question. The flanges on the block are most likely the same, so I think you only need to be concerned about the cat end of the header. I don't know about whether there is a difference between JDM cat lengths and USDM cat lengths.
There's a user here called RedRacer that knows a lot about 4th gen cars. He might be able to help you.