I have 90 prelude and the blower, and the fluid levels are ok.... But it blows cold air....even when I try to warm in the morning nothing, but cold air. I don't think my temp indicator slide is broken. But it does move very freely with no resistance.
Thank you for your help.
Heating Problem
Moderators: RedRacer, Moderators
- spiffyguido
- Moderator
- Posts: 2196
- Joined: Fri Nov 11, 2005 2:55 am
- Prelude Model: 1991 SE-SR
- Location: Alberta, Canada
- Contact:
Re: Heating Problem
I had that problem in my 86.
If it's the same as my 86, the hot/cold slider works by using a vaccuum line from the engine. Check the back side of your engine and the firewall for a vaccuum line that is leaking or has fallen off. That's likely what it is.
If it's the same as my 86, the hot/cold slider works by using a vaccuum line from the engine. Check the back side of your engine and the firewall for a vaccuum line that is leaking or has fallen off. That's likely what it is.
-
- Prelude Enthusiast
- Posts: 2
- Joined: Mon Oct 19, 2009 8:39 am