Page 1 of 1
acc belt tensioner
Posted: Mon Jul 12, 2010 7:51 pm
by hdtower2
hi everyone,i am the father of a very proud prelude owner.its a 1991 fuel injected model.2.0 the acc belt tensioner pulley(p/s belt tensioner)fell off. i have the new one but it looks like im missing a spacer. am i???it doesnt fit tight on the shaft.i wouldve thought that wouldve come with it but apparently not.any help and possibly p/n would be appreciated.tony c.
Re: acc belt tensioner
Posted: Tue Jul 13, 2010 11:19 am
by spiffyguido
Have a look at the diagram in the link below and see if you have all the parts shown. There isn't much information on the PS idler pulley in the service manual, so I'm hoping this helps you:
http://www.hondaautomotiveparts.com/aut ... EED+SENSOR
Re: acc belt tensioner
Posted: Tue Jul 13, 2010 5:47 pm
by hdtower2
thanks for the quick response! the diagram did help although ...of course..the part i am missing does not have a corresponding part number!!guess ill call honda. my nearest dealer is 100 miles away.illustration # 16
Re: acc belt tensioner
Posted: Wed Jul 14, 2010 6:28 am
by hdtower2
ok so i m wondering if anyone has any idea as to where i can locate the acc idler pulley collar. no one seems to have it.need all the help i can get. orig P/N is 56985-pk1-000.
Re: acc belt tensioner
Posted: Wed Jul 14, 2010 9:55 am
by spiffyguido
Have you tried a wrecker?
Re: acc belt tensioner
Posted: Wed Jul 14, 2010 10:11 pm
by hdtower2
found it!!im buying what seems is the only two in existence.one out of texas and one in hawaii !! thank you spiffy guido!!i really enjoy the posts on here so ill be back!!