Page 1 of 1
1987 honda prelude 2.0 si
Posted: Fri Dec 09, 2011 5:54 pm
by wingwong
Hello, Does any know if you can repair a leaking rack and pinion with one of those gates repair kit? Thanks
Re: 1987 honda prelude 2.0 si
Posted: Fri Dec 09, 2011 10:30 pm
by spiffyguido
Not sure about the repair kit. Where is the leak?
Re: 1987 honda prelude 2.0 si
Posted: Tue Dec 13, 2011 7:09 pm
by wingwong
It is leaking on the right side from the boot Thanks
Re: 1987 honda prelude 2.0 si
Posted: Wed Dec 14, 2011 11:11 am
by spiffyguido
Hmmm...That's tricky. Best case is that you could look at
www.hondaautomotiveparts.com to see if there is a replacement seal for that end and then rebuild it. Otherwise, it'd be easiest to just find a replacement rack from a wrecker.
Re: 1987 honda prelude 2.0 si
Posted: Wed Dec 14, 2011 2:45 pm
by wingwong
Thank You,it really nice of you to share your time and wisdom
Re: 1987 honda prelude 2.0 si
Posted: Sat Feb 02, 2013 12:11 pm
by Cancer
Lol I got the same car bud and I just finished replacing my rack its not that hard you should be able to do it in a day easily if you know what your doing
Re: 1987 honda prelude 2.0 si
Posted: Wed May 15, 2013 5:12 am
by isaiahpena
i have the the same problem from right side i need the rack..where can i get it and for how much id like to work on it myself
Re: 1987 honda prelude 2.0 si
Posted: Sun May 19, 2013 8:18 pm
by spiffyguido
Best bet is to check
http://www.hondaautomotiveparts.com" rel="nofollow" target="_blank. If Honda still makes it, you'll be able to get it there.
Otherwise I'd start looking at aftermarket parts. See our 'Parts' page at the top of the screen for a search box that will let you search parts available on Amazon. There's a lot of good stuff there.