Page 1 of 1

AC and Crank help please

Posted: Wed Mar 03, 2010 7:10 am
by sleepy6691
hey new to the sit i have questions

1. how do u take off your oil pump and crankshaft(for seals)
because i believe theres oil leaking from the area, so im redon the seals
what kinda tools, how long, should i drain the car of oil first.

2. I have an AC and heater problem. When i turn te air on, it blows but only from the door side vents
And there is no temperature adjustment when i turn heater or AC on


1992 h23a1

help please :shock:

Re: AC and Crank help please

Posted: Wed Mar 03, 2010 12:28 pm
by spiffyguido
Regarding item 1:

Where is the leak exactly. Taking off the crank and the oil pump requires dropping the whole bottom end of the engine. It's quite a bit of work. Be sure you have pinpointed the leak.

Regarding item 2:
It sounds like your troubles with heat/air might be due to a malfunctioning heat slider. The mechanics of how these work is detailed in the service manual which can be downloaded from the manuals section. You may also find the following thread helpful:

viewtopic.php?f=3&t=665

Do you agree that your slider might be to blame?