Page 1 of 1

Shop Manuals

Posted: Mon Oct 22, 2012 10:54 pm
by marvelous
Hi Marvelous hear Iv managed to get my 88 4ws back to gather after the valve job and to my surprise the fourth turn on the ignition created this beautiful sound justifying my efforts. After letting warm up (idle down) I set the timing as described in the manual. I set in the seat to check the gages and reality struck. My sense of accomplishment dropped way down. I had no tach ,no temp, no fuel, nothing and immediately shut it down worried about overheating . My search for the cause is ongoing and the manual downloaded from this sight priceless, but either i didn't get the full download or 15 pages of schematics have ben lost. My download ended with a index(see attachment) to pages I cant find. Did my computer not download the full manual? Am i overlooking something? Do I need to try another download ? What is the " wiring diagram index " referring to.? Im tracing circuits with my phone hound and with all the wires bundled so tight I think im getting bleed thru. any help would be great-fully appreciated .

Re: Shop Manuals

Posted: Tue Oct 23, 2012 11:23 am
by spiffyguido
When I download the 1988 shop manual, I get 970 pages in the PDF. Is that what you're getting.

The 'wiring diagram index' probably refers to page 751 in the PDF. It's the table of contents for the electrical system.

Sounds like your gauge cluster isn't getting any signals. Check your fuses.